Custom Automotive Products Specialists
Thank you for shopping at CAR Motorsports. Visa,
Mastercard and PAYPAL payments are gladly accepted.
|
Custom Automotive Products Specialists
|
|
|
Premium 3M Double Sided Die Cut Emblem Tape*TO PURCHASE BY PHONE CALL TOLL FREE: 1-877-FOR-CARZ (1-877-367-2279) or 1-877-4MY-CARZ (1-877-469-2279)**IN ATLANTA CALL: 678-574-4298*CAR Motorsports is pleased to offer our premium 3M double sided die cut emblem tape. This allows you to reuse your emblems rather than purchase new emblems. Our tape is a premium 3M brand acrylic foam tape that offers superior adhesive qualities over the OEM tape. To attach the emblems with the tape follow these instructions: Clean all of the old tape off the emblem and the car. Use solvent or alcohol to get it completely clean. Then apply the tape to the emblem, leaving the red film on at this point. Rub the tape a bit to set it. The tape is very sticky so you need to place the emblem precisely. If you have a good eye, you can just stick it to the car. You can try to align it to the residual shadow that usually shows on the paint. Or, try this: apply two strips of masking tape to the face of the emblem leaving about 6" hanging upward. Then hang the emblem on the fender. Take a few steps back to make sure it's properly positioned. Now, flip the emblem up (leaving the masking tape in place), peel the red film, and set the emblem back in its final position. Finally, remove the masking tape and apply pressure to the emblem to firmly set it on the fender.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
BUICK word Emblem Tape - used on BUICK emblems found on most 80's and early 90's model Buick Cars 
-lg.jpg)
